MECPOW X4 Pro vs Atomstack X20 Pro: Which Should You Buy?
Side-by-side specs, settings, and decision guide. Both have community-tested settings for 5 shared materials.
Which one should you buy?
Pick the MECPOW X4 Pro if you want: more cutting power (22W vs 20W); native LightBurn support (industry-standard).
Where to buy
MECPOW X4 Pro: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
Where to buy
Atomstack X20 Pro: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
Settings Comparison
Shopping for a MECPOW X4 Pro? Check the current price.
See price on Amazon →Shopping for a Atomstack X20 Pro? Check the current price.
See current price →Frequently Asked Questions
Which is better, the MECPOW X4 Pro or Atomstack X20 Pro?
It depends on your use case. MECPOW X4 Pro is 22W diode with 410×400mm bed. Atomstack X20 Pro is 20W diode with 400×400mm bed. See the decision guide and side-by-side specs above.
What materials can both the MECPOW X4 Pro and Atomstack X20 Pro cut or engrave?
Both machines have community-tested settings for 5 shared materials. The settings table above lists every material with side-by-side speed, power, passes, and air assist values for direct comparison.
Is the MECPOW X4 Pro or Atomstack X20 Pro compatible with LightBurn?
The MECPOW X4 Pro works natively with LightBurn. The Atomstack X20 Pro uses . LightBurn compatibility may be possible via a community device profile but is not officially supported.
Is the MECPOW X4 Pro (22W) much faster than the Atomstack X20 Pro (20W)?
Higher wattage typically means faster cutting and the ability to cut thicker material in fewer passes. The MECPOW X4 Pro (22W) cuts thicker material in single passes and engraves at higher speeds than the Atomstack X20 Pro (20W). For raster engraving the difference is smaller because surface engraving is limited by mechanical scan speed.
Popular Comparisons
Settings are community-contributed and may not reflect your exact machine configuration or material batch. Always test on scrap first. Some links are affiliate links: we may earn a small commission at no extra cost to you.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris