Trotec Speedy 100 vs Gweike Cloud Pro II 55W: Which Should You Buy?
Side-by-side specs, settings, and decision guide. Both have community-tested settings for 5 shared materials.
Which one should you buy?
Pick the Trotec Speedy 100 if you want: more cutting power (60W vs 55W); a larger work area (610×305mm).
Pick the Gweike Cloud Pro II 55W if you want: native LightBurn support (industry-standard).
Where to buy
Trotec Speedy 100: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
Where to buy
Gweike Cloud Pro II 55W: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
Settings Comparison
Shopping for a Trotec Speedy 100? Check the current price.
See price on Amazon →Shopping for a Gweike Cloud Pro II 55W? Check the current price.
See price on Amazon →Frequently Asked Questions
Which is better, the Trotec Speedy 100 or Gweike Cloud Pro II 55W?
It depends on your use case. Trotec Speedy 100 is 60W co2 with 610×305mm bed. Gweike Cloud Pro II 55W is 55W co2 with 510×300mm bed. See the decision guide and side-by-side specs above.
What materials can both the Trotec Speedy 100 and Gweike Cloud Pro II 55W cut or engrave?
Both machines have community-tested settings for 5 shared materials. The settings table above lists every material with side-by-side speed, power, passes, and air assist values for direct comparison.
Is the Gweike Cloud Pro II 55W or Trotec Speedy 100 compatible with LightBurn?
The Gweike Cloud Pro II 55W works natively with LightBurn. The Trotec Speedy 100 uses Trotec Ruby. LightBurn compatibility may be possible via a community device profile but is not officially supported.
Is the Trotec Speedy 100 (60W) much faster than the Gweike Cloud Pro II 55W (55W)?
Higher wattage typically means faster cutting and the ability to cut thicker material in fewer passes. The Trotec Speedy 100 (60W) cuts thicker material in single passes and engraves at higher speeds than the Gweike Cloud Pro II 55W (55W). For raster engraving the difference is smaller because surface engraving is limited by mechanical scan speed.
Popular Comparisons
Settings are community-contributed and may not reflect your exact machine configuration or material batch. Always test on scrap first. Some links are affiliate links: we may earn a small commission at no extra cost to you.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris