Atomstack A10 Pro: 3mm Clear Acrylic
2 community-tested settings for engrave, cut 3mm Clear Acrylic on the Atomstack A10 Pro. Always run a test on scrap material first.
Where to buy
Atomstack A10 Pro: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut 3mm Clear Acrylic on the Atomstack A10 Pro (10W diode laser). Cast acrylic engraves more cleanly than extruded; for cutting, a single clean pass at the right speed usually beats multiple passes. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm Clear Acrylic on the Atomstack A10 Pro?
The top-rated community setting uses 2500 mm/min at 45% power. 10W-class diode baseline — consistent with other 10W diode machines in the settings database (Sculpfun S9, Ortur Laser Master 3, xTool M1). Always test on scrap first; individual units vary.
How many passes does the Atomstack A10 Pro need to cut 3mm Clear Acrylic?
Settings here range from 1 to 4 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for 3mm Clear Acrylic on the Atomstack A10 Pro?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with 3mm Clear Acrylic
Templates ready to cut on your Atomstack A10 Pro once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris