Atomstack Kraft: 3mm Basswood Plywood
2 community-tested settings for engrave, cut 3mm Basswood Plywood on the Atomstack Kraft. Always run a test on scrap material first.
Where to buy
Atomstack Kraft: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut 3mm Basswood Plywood on the Atomstack Kraft (20W laser laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm Basswood Plywood on the Atomstack Kraft?
The top-rated community setting uses 3000 mm/min at 20% power. Official Atomstack engraving parameter table: line interval 0.1mm, 3000mm/min, 20% max power — same table applies across the Atomstack 20W diode line.
How many passes does the Atomstack Kraft need to cut 3mm Basswood Plywood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Basswood Plywood on the Atomstack Kraft?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Atomstack Kraft for 3mm Basswood Plywood?
The Atomstack Kraft works with LightBurn and AtomStack App. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with 3mm Basswood Plywood
Templates ready to cut on your Atomstack Kraft once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris