Atomstack X20 Pro — Cardboard
2 community-tested settings for cut Cardboard on the Atomstack X20 Pro. Always run a test on scrap material first.
Where to buy
Buy the Atomstack X20 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut Cardboard on the Atomstack X20 Pro (20W diode laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
2 settings
Frequently asked questions
What speed should I use to cut Cardboard on the Atomstack X20 Pro?
The top-rated community setting uses 800 mm/min at 50% power. General 20W diode laser community guidance from LA Hobby Guy (lahobbyguy.com/bb/viewtopic.php?t=33 'Laser Power & Speed Settings for 20W Diode laser') and Diode Laser Wiki (diode-laser-wiki.com/documentation/guideline-settings/). Cardboard is an easy material for 20W diodes; 800mm/min at 50% is a standard community starting point for corrugated/craft cardboard. Speeds of 500-1000mm/min at 40-60% are the typical community-tested range. Air assist helps prevent flare-ups. Adjust down for thicker cardboard.
How many passes does the Atomstack X20 Pro need to cut Cardboard?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cardboard on the Atomstack X20 Pro?
Yes — 2 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Cardboard
Templates ready to cut on your Atomstack X20 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris