Atomstack X70 Max: Maple
2 community-tested settings for engrave, cut Maple on the Atomstack X70 Max. Always run a test on scrap material first.
Where to buy
Atomstack X70 Max: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut Maple on the Atomstack X70 Max (70W diode laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave Maple on the Atomstack X70 Max?
The top-rated community setting uses 9350 mm/min at 75% power. Estimated: wattage-scaled from this brand's own real settings at a different power tier. Unverified -- treat as a starting point.
How many passes does the Atomstack X70 Max need to cut Maple?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Maple on the Atomstack X70 Max?
Yes: 2 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Maple
Templates ready to cut on your Atomstack X70 Max once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris