Atomstack X70 Max: Rubber Stamp Material
1 community-tested setting for engrave Rubber Stamp Material on the Atomstack X70 Max. Always run a test on scrap material first.
Where to buy
Atomstack X70 Max: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Rubber Stamp Material on the Atomstack X70 Max (70W diode laser). Always test on scrap before committing to your final piece: material batches can vary in density and composition.
1 setting
Frequently asked questions
What speed should I use to engrave Rubber Stamp Material on the Atomstack X70 Max?
The top-rated community setting uses 3750 mm/min at 55% power. Estimated: wattage-scaled from this brand's own real settings at a different power tier. Unverified -- treat as a starting point.
Can the Atomstack X70 Max cut Rubber Stamp Material?
Cutting Rubber Stamp Material on the Atomstack X70 Max may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Atomstack X70 Max need to engrave Rubber Stamp Material?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Rubber Stamp Material on the Atomstack X70 Max?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Rubber Stamp Material
Templates ready to cut on your Atomstack X70 Max once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris