Boss LS-1630: 3mm Clear Acrylic
1 community-tested setting for cut 3mm Clear Acrylic on the Boss LS-1630. Always run a test on scrap material first.
Where to buy
Boss LS-1630: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover cut 3mm Clear Acrylic on the Boss LS-1630 (100W CO₂ laser). Cast acrylic engraves more cleanly than extruded; for cutting, a single clean pass at the right speed usually beats multiple passes.
1 setting
Frequently asked questions
What speed should I use to cut 3mm Clear Acrylic on the Boss LS-1630?
The top-rated community setting uses 38 mm/s at 50% power. Clear acrylic in one pass on 100W Boss.
How many passes does the Boss LS-1630 need to cut 3mm Clear Acrylic?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Clear Acrylic on the Boss LS-1630?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with 3mm Clear Acrylic
Templates ready to cut on your Boss LS-1630 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris