Boss LS-1630 — Oak
2 community-tested settings for cut, engrave Oak on the Boss LS-1630. Always run a test on scrap material first.
These 2 settings cover cut and engrave Oak on the Boss LS-1630 (100W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to cut Oak on the Boss LS-1630?
The top-rated community setting uses 600 mm/min at 90% power. 100W CO2 cuts oak in one clean pass — a major advantage over lower-wattage machines. 600mm/min at 90%. Clean edges, minimal char. Air assist on. The LS-1630's large bed (16"×30") is well-suited for oak plank work and large sign blanks.
How many passes does the Boss LS-1630 need to cut Oak?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Oak on the Boss LS-1630?
Yes — 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Oak
Templates ready to cut on your Boss LS-1630 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris