ComMarker B6 20W UV — 3mm Mirrored Acrylic
2 community-tested settings for engraving 3mm Mirrored Acrylic on the ComMarker B6 20W UV. Always run a test on scrap material first.
These 2 settings cover engrave 3mm Mirrored Acrylic on the ComMarker B6 20W UV (20W UV laser). Cast acrylic engraves more cleanly than extruded; for cutting, a single clean pass at the right speed usually beats multiple passes.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm Mirrored Acrylic on the ComMarker B6 20W UV?
The top-rated community setting uses 300 mm/min at null% power. Engrave from the BACK side for a clean mirrored result.
How many passes does the ComMarker B6 20W UV need to engrave 3mm Mirrored Acrylic?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Mirrored Acrylic on the ComMarker B6 20W UV?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave 3mm Mirrored Acrylic on the ComMarker B6 20W UV?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with 3mm Mirrored Acrylic
Templates ready to cut on your ComMarker B6 20W UV once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris