ComMarker B6 20W UV — Cork Sheet 3mm
1 community-tested setting for cut Cork Sheet 3mm on the ComMarker B6 20W UV. Always run a test on scrap material first.
These 1 setting cover cut Cork Sheet 3mm on the ComMarker B6 20W UV (20W UV laser). Always test on scrap before committing to your final piece — material batches can vary in density and composition.
1 setting
Frequently asked questions
What speed should I use to cut Cork Sheet 3mm on the ComMarker B6 20W UV?
The top-rated community setting uses 50 mm/s at 95% power. Low speed required for clean cut through cork.
How many passes does the ComMarker B6 20W UV need to cut Cork Sheet 3mm?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cork Sheet 3mm on the ComMarker B6 20W UV?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Cork Sheet 3mm
Templates ready to cut on your ComMarker B6 20W UV once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris