ComMarker B6 20W UV — Stainless Steel
2 community-tested settings for mark Stainless Steel on the ComMarker B6 20W UV. Always run a test on scrap material first.
These 2 settings cover mark Stainless Steel on the ComMarker B6 20W UV (20W UV laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to mark Stainless Steel on the ComMarker B6 20W UV?
The top-rated community setting uses 300 mm/s at 55% power. UV can mark stainless. Slower than fiber but useful in a pinch.
How many passes does the ComMarker B6 20W UV need to engrave Stainless Steel?
Settings here range from 1 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Stainless Steel on the ComMarker B6 20W UV?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Stainless Steel
Templates ready to cut on your ComMarker B6 20W UV once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris