Commarker B6 30W — Anodized Aluminum
3 community-tested settings for engrave, mark Anodized Aluminum on the Commarker B6 30W. Always run a test on scrap material first.
Where to buy
Buy the Commarker B6 30W — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 3 settings cover engrave and mark Anodized Aluminum on the Commarker B6 30W (30W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
3 settings
Frequently asked questions
What speed should I use to engrave Anodized Aluminum on the Commarker B6 30W?
The top-rated community setting uses 2500 mm/s at 20% power. Extra power allows faster speed. Crisp white result.
How many passes does the Commarker B6 30W need to engrave Anodized Aluminum?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Anodized Aluminum on the Commarker B6 30W?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Anodized Aluminum on the Commarker B6 30W?
Settings here use 300–500 DPI. Higher DPI gives finer detail but significantly increases burn time — 300 DPI is a good balance for most projects.
Now make something with Anodized Aluminum
Templates ready to cut on your Commarker B6 30W once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris