Creality Falcon A1: 3mm Baltic Birch Plywood
2 community-tested settings for cut, engrave 3mm Baltic Birch Plywood on the Creality Falcon A1. Always run a test on scrap material first.
Where to buy
Creality Falcon A1: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave 3mm Baltic Birch Plywood on the Creality Falcon A1 (22W diode laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to cut 3mm Baltic Birch Plywood on the Creality Falcon A1?
The top-rated community setting uses 900 mm/min at 70% power. Official Creality plywood vector cut setting for ~1/4in (6mm) plywood (70% power / 15mm/s) -- our catalog entry is nominally 3mm, real thickness tested was thicker. Real setting from Creality's official Falcon-series material settings guide (crealityfalcon.com) -- exact material/thickness may differ slightly from ours; treat as authoritative for this material class.
How many passes does the Creality Falcon A1 need to cut 3mm Baltic Birch Plywood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Baltic Birch Plywood on the Creality Falcon A1?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with 3mm Baltic Birch Plywood
Templates ready to cut on your Creality Falcon A1 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris