Creality Falcon A1: 3mm Clear Acrylic
1 community-tested setting for cut 3mm Clear Acrylic on the Creality Falcon A1. Always run a test on scrap material first.
Where to buy
Creality Falcon A1: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover cut 3mm Clear Acrylic on the Creality Falcon A1 (22W diode laser). Cast acrylic engraves more cleanly than extruded; for cutting, a single clean pass at the right speed usually beats multiple passes.
1 setting
Frequently asked questions
What speed should I use to cut 3mm Clear Acrylic on the Creality Falcon A1?
The top-rated community setting uses 4200 mm/min at 40% power. Official Creality acrylic cut setting for 5mm acrylic (40% power / 70mm/s) -- our catalog entry is nominally 3mm, real thickness tested was 5mm. Real setting from Creality's official Falcon-series material settings guide (crealityfalcon.com) -- exact material/thickness may differ slightly from ours; treat as authoritative for this material class.
How many passes does the Creality Falcon A1 need to cut 3mm Clear Acrylic?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Clear Acrylic on the Creality Falcon A1?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with 3mm Clear Acrylic
Templates ready to cut on your Creality Falcon A1 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris