Creality Falcon A1: Spray Painted Metal
1 community-tested setting for engrave Spray Painted Metal on the Creality Falcon A1. Always run a test on scrap material first.
Where to buy
Creality Falcon A1: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Spray Painted Metal on the Creality Falcon A1 (22W diode laser). Metal marking typically requires Cermark spray or an anodized coating: bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to engrave Spray Painted Metal on the Creality Falcon A1?
The top-rated community setting uses 2800 mm/min at 75% power. Estimated: copied from this same brand's closely related, similarly-powered real machine. Unverified -- treat as a starting point.
Can the Creality Falcon A1 cut Spray Painted Metal?
A 22W diode laser can mark or engrave metal surfaces but cannot cut through them: metal cutting requires a much higher-powered laser or a plasma cutter.
How many passes does the Creality Falcon A1 need to engrave Spray Painted Metal?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Spray Painted Metal on the Creality Falcon A1?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Spray Painted Metal
Templates ready to cut on your Creality Falcon A1 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris