Creality Falcon — Cork 3mm
2 community-tested settings for cut, engrave Cork 3mm on the Creality Falcon. Always run a test on scrap material first.
Where to buy
Buy the Creality Falcon — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Cork 3mm on the Creality Falcon (10W diode laser). Always test on scrap before committing to your final piece — material batches can vary in density and composition. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to cut Cork 3mm on the Creality Falcon?
The top-rated community setting uses 350 mm/min at 95% power, 2 passes. Cork cuts in 2 passes at 5W. No air assist recommended — can cause cork blowout. Clean edge.
How many passes does the Creality Falcon need to cut Cork 3mm?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Cork 3mm on the Creality Falcon?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Cork 3mm on the Creality Falcon?
Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Cork 3mm
Templates ready to cut on your Creality Falcon once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris