Creality Falcon2 — Basswood
1 community-tested setting for cut Basswood on the Creality Falcon2. Always run a test on scrap material first.
Where to buy
Buy the Creality Falcon2 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover cut Basswood on the Creality Falcon2 (22W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to cut Basswood on the Creality Falcon2?
The top-rated community setting uses 3000 mm/min at 80% power. 22W cuts 3mm basswood in one pass. Good results with air assist.
How many passes does the Creality Falcon2 need to cut Basswood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Basswood on the Creality Falcon2?
Yes — 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Creality Falcon2 for Basswood?
The Creality Falcon2 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Basswood
Templates ready to cut on your Creality Falcon2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris