Creality Falcon2 — Pine
2 community-tested settings for cut, engrave Pine on the Creality Falcon2. Always run a test on scrap material first.
Where to buy
Buy the Creality Falcon2 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Pine on the Creality Falcon2 (22W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to cut Pine on the Creality Falcon2?
The top-rated community setting uses 250 mm/min at 100% power, 3 passes. Pine can be cut on the Falcon2 at 22W but requires 3 passes at full power. Air assist critical for resin smoke management. Results are functional but edges have noticeable charring. Recommend higher wattage for regular pine cutting.
How many passes does the Creality Falcon2 need to cut Pine?
Settings here range from 1 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Pine on the Creality Falcon2?
Yes — 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Creality Falcon2 for Pine?
The Creality Falcon2 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Pine
Templates ready to cut on your Creality Falcon2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris