Creality Falcon2 — Slate
2 community-tested settings for engrave Slate on the Creality Falcon2. Always run a test on scrap material first.
Where to buy
Buy the Creality Falcon2 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave Slate on the Creality Falcon2 (22W diode laser). Stone engraving is forgiving — the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
2 settings
Frequently asked questions
What speed should I use to engrave Slate on the Creality Falcon2?
The top-rated community setting uses 2500 mm/min at 72% power. Good white engrave on slate. Invert image.
Can the Creality Falcon2 cut Slate?
Cutting Slate on the Creality Falcon2 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Creality Falcon2 need to engrave Slate?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Slate on the Creality Falcon2?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Slate on the Creality Falcon2?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the Creality Falcon2 for Slate?
The Creality Falcon2 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Slate
Templates ready to cut on your Creality Falcon2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris