Epilog Fusion Pro — Bamboo Cutting Board
1 community-tested setting for engrave Bamboo Cutting Board on the Epilog Fusion Pro. Always run a test on scrap material first.
These 1 setting cover engrave Bamboo Cutting Board on the Epilog Fusion Pro (50W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to engrave Bamboo Cutting Board on the Epilog Fusion Pro?
The top-rated community setting uses 280 mm/s at 28% power. Thick bamboo — engrave only.
Can the Epilog Fusion Pro cut Bamboo Cutting Board?
Cutting Bamboo Cutting Board on the Epilog Fusion Pro may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Epilog Fusion Pro need to engrave Bamboo Cutting Board?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Bamboo Cutting Board on the Epilog Fusion Pro?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Bamboo Cutting Board on the Epilog Fusion Pro?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Bamboo Cutting Board
Templates ready to cut on your Epilog Fusion Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris