Flux Beamo — 3mm Basswood Plywood
2 community-tested settings for engrave, cut 3mm Basswood Plywood on the Flux Beamo. Always run a test on scrap material first.
These 2 settings cover engrave and cut 3mm Basswood Plywood on the Flux Beamo (30W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm Basswood Plywood on the Flux Beamo?
The top-rated community setting uses 200 mm/s at 20% power. Fast raster engrave at 200mm/s. Beam Studio's engrave presets work well for standard materials. The Beamo's camera-based alignment makes it easy to position artwork precisely on each workpiece — particularly useful for personalised items where placement matters.
How many passes does the Flux Beamo need to cut 3mm Basswood Plywood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 3mm Basswood Plywood on the Flux Beamo?
Yes — 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What DPI should I use to engrave 3mm Basswood Plywood on the Flux Beamo?
Settings here use 250 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with 3mm Basswood Plywood
Templates ready to cut on your Flux Beamo once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris