Flux Beamo — 6mm MDF
1 community-tested setting for cut 6mm MDF on the Flux Beamo. Always run a test on scrap material first.
These 1 setting cover cut 6mm MDF on the Flux Beamo (30W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
1 setting
Frequently asked questions
What speed should I use to cut 6mm MDF on the Flux Beamo?
The top-rated community setting uses 7 mm/s at 90% power, 2 passes. 2 passes at 30W. Heavy fumes — strong ventilation required.
How many passes does the Flux Beamo need to cut 6mm MDF?
Settings here range from 2 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for 6mm MDF on the Flux Beamo?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with 6mm MDF
Templates ready to cut on your Flux Beamo once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris