Flux Beamo
co2 laser30W
Top 10 community settings — bonnycreations.com
| Material | Op | Speed · Power · Passes |
|---|---|---|
| Cork | engrave | 250 mm/s · 15%✓ verified |
| 2mm MDF | cut | 18 mm/s · 60% · air |
| 3mm Walnut Plywood | cut | 15 mm/s · 65% · air✓ verified |
| Kraft Paper | cut | 200 mm/s · 12%✓ verified |
| Cardboard | cut | 100 mm/s · 25%✓ verified |
| Slate | engrave | 200 mm/s · 65%✓ verified |
| Genuine Leather | cut | 22 mm/s · 65% |
| Genuine Leather | engrave | 250 mm/s · 18%✓ verified |
| 3mm Clear Acrylic | engrave | 250 mm/s · 15%✓ verified |
| 3mm Clear Acrylic | cut | 12 mm/s · 70% · air✓ verified |
Community-contributed settings. Results vary by material batch and machine calibration — always test on scrap first.
Full settings library at bonnycreations.com/settings/machines/flux-beamo
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris