Genmitsu LE5040: Slate
1 community-tested setting for engrave Slate on the Genmitsu LE5040. Always run a test on scrap material first.
Where to buy
Genmitsu LE5040: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Slate on the Genmitsu LE5040 (5W diode laser). Stone engraving is forgiving: the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
1 setting
Frequently asked questions
What speed should I use to engrave Slate on the Genmitsu LE5040?
The top-rated community setting uses 1800 mm/min at 72% power. White engrave on slate — invert your image before sending. Wipe with a damp cloth after to reveal full contrast. 5W-class diode baseline — consistent with other 5W/6W diode machines in the settings database (Longer Ray5, Creality Falcon 5W, Atomstack A5 Pro). Always test on scrap first; individual units vary.
Can the Genmitsu LE5040 cut Slate?
Cutting Slate on the Genmitsu LE5040 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Genmitsu LE5040 need to engrave Slate?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Slate on the Genmitsu LE5040?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Slate
Templates ready to cut on your Genmitsu LE5040 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris