Glowforge Aura: 3mm Poplar Plywood
2 community-tested settings for engrave, cut 3mm Poplar Plywood on the Glowforge Aura. Always run a test on scrap material first.
Where to buy
Glowforge Aura: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover engrave and cut 3mm Poplar Plywood on the Glowforge Aura (6W diode laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to engrave 3mm Poplar Plywood on the Glowforge Aura?
The top-rated community setting uses 5000 mm/min at 50% power. Light surface engrave on 3mm poplar ply. Reduce power for shallower marks.
How many passes does the Glowforge Aura need to cut 3mm Poplar Plywood?
Settings here range from 1 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for 3mm Poplar Plywood on the Glowforge Aura?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with 3mm Poplar Plywood
Templates ready to cut on your Glowforge Aura once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris