Glowforge Aura — Genuine Leather (Veg-Tan, ~3mm)
1 community-tested setting for engrave Genuine Leather (Veg-Tan, ~3mm) on the Glowforge Aura. Always run a test on scrap material first.
Where to buy
Buy the Glowforge Aura — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Genuine Leather (Veg-Tan, ~3mm) on the Glowforge Aura (6W diode laser). Genuine leather tolerates lower power than faux leather; go slowly and increase passes rather than power to avoid scorching.
1 setting
Frequently asked questions
What speed should I use to engrave Genuine Leather (Veg-Tan, ~3mm) on the Glowforge Aura?
The top-rated community setting uses 170 mm/min at 60% power. Aura engraves leather well at moderate power. Use Proofgrade leather settings as baseline.
Can the Glowforge Aura cut Genuine Leather (Veg-Tan, ~3mm)?
Cutting Genuine Leather (Veg-Tan, ~3mm) on the Glowforge Aura may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Glowforge Aura need to engrave Genuine Leather (Veg-Tan, ~3mm)?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Genuine Leather (Veg-Tan, ~3mm) on the Glowforge Aura?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Genuine Leather (Veg-Tan, ~3mm)
Templates ready to cut on your Glowforge Aura once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris