Glowforge Aura — Slate
2 community-tested settings for engrave Slate on the Glowforge Aura. Always run a test on scrap material first.
Where to buy
Buy the Glowforge Aura — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover engrave Slate on the Glowforge Aura (6W diode laser). Stone engraving is forgiving — the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
2 settings
Frequently asked questions
What speed should I use to engrave Slate on the Glowforge Aura?
The top-rated community setting uses 1500 mm/min at 80% power. White frost on slate. Slower than 10W but results are good.
Can the Glowforge Aura cut Slate?
Cutting Slate on the Glowforge Aura may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Glowforge Aura need to engrave Slate?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Slate on the Glowforge Aura?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Slate
Templates ready to cut on your Glowforge Aura once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris