Glowforge Pro — 3mm Clear Acrylic (Cast)

What speed should I use to engrave 3mm Clear Acrylic (Cast) on the Glowforge Pro?

The top-rated community setting uses 440 mm/min at null% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.

How many passes does the Glowforge Pro need to engrave 3mm Clear Acrylic (Cast)?

All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.

Do I need air assist for 3mm Clear Acrylic (Cast) on the Glowforge Pro?

Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.

What DPI should I use to engrave 3mm Clear Acrylic (Cast) on the Glowforge Pro?

Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.

What software do I use with the Glowforge Pro for 3mm Clear Acrylic (Cast)?

The Glowforge Pro works with Glowforge App. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.