Glowforge Pro — 6mm Baltic Birch Plywood

What speed should I use to cut 6mm Baltic Birch Plywood on the Glowforge Pro?

The top-rated community setting uses 168 glowforge_units at 100% power. Thicker plywood. Sometimes needs a 2nd pass if there are voids in the core.

How many passes does the Glowforge Pro need to cut 6mm Baltic Birch Plywood?

All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.

Do I need air assist for 6mm Baltic Birch Plywood on the Glowforge Pro?

Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.

What DPI should I use to engrave 6mm Baltic Birch Plywood on the Glowforge Pro?

Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.

What software do I use with the Glowforge Pro for 6mm Baltic Birch Plywood?

The Glowforge Pro works with Glowforge App. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.