Glowforge Pro — Alder 3mm
1 community-tested setting for cut Alder 3mm on the Glowforge Pro. Always run a test on scrap material first.
Where to buy
Buy the Glowforge Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 1 setting cover cut Alder 3mm on the Glowforge Pro (45W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to cut Alder 3mm on the Glowforge Pro?
The top-rated community setting uses 24 mm/s at 50% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Glowforge Pro need to cut Alder 3mm?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Alder 3mm on the Glowforge Pro?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What software do I use with the Glowforge Pro for Alder 3mm?
The Glowforge Pro works with Glowforge App. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Alder 3mm
Templates ready to cut on your Glowforge Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris