Glowforge Pro — Cherry
2 community-tested settings for cut, engrave Cherry on the Glowforge Pro. Always run a test on scrap material first.
Where to buy
Buy the Glowforge Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Cherry on the Glowforge Pro (45W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
2 settings
Frequently asked questions
What speed should I use to cut Cherry on the Glowforge Pro?
The top-rated community setting uses 203 mm/min at 100% power. Cherry cuts cleanly in one pass on the Glowforge Pro. About 300 Glowforge speed units / Full power. Less charring than oak. Clean edges. Popular for intricate designs — the Glowforge community has extensive cherry cutting experience.
How many passes does the Glowforge Pro need to cut Cherry?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cherry on the Glowforge Pro?
Yes — 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Glowforge Pro for Cherry?
The Glowforge Pro works with Glowforge App. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Cherry
Templates ready to cut on your Glowforge Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris