JPT MOPA 30W Fiber — Aluminum Dog Tag
2 community-tested settings for engrave, mark Aluminum Dog Tag on the JPT MOPA 30W Fiber. Always run a test on scrap material first.
These 2 settings cover engrave and mark Aluminum Dog Tag on the JPT MOPA 30W Fiber (30W fiber laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
2 settings
Frequently asked questions
What speed should I use to engrave Aluminum Dog Tag on the JPT MOPA 30W Fiber?
The top-rated community setting uses 2200 mm/s at 26% power. Fast white mark on aluminum dog tags. MOPA precision is excellent.
How many passes does the JPT MOPA 30W Fiber need to engrave Aluminum Dog Tag?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Aluminum Dog Tag on the JPT MOPA 30W Fiber?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Aluminum Dog Tag
Templates ready to cut on your JPT MOPA 30W Fiber once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris