Longer Ray5 — Cardboard
2 community-tested settings for cut Cardboard on the Longer Ray5. Always run a test on scrap material first.
Where to buy
Buy the Longer Ray5 — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut Cardboard on the Longer Ray5 (5W diode laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
2 settings
Frequently asked questions
What speed should I use to cut Cardboard on the Longer Ray5?
The top-rated community setting uses 600 mm/min at 85% power. Single-wall cardboard cuts in one pass at 5W. Keep power high and speed moderate. Good for stencils, templates, and paper crafts. Corrugated cardboard may need a second pass. Never leave the Ray5 unattended when cutting cardboard — it's more flammable than wood.
How many passes does the Longer Ray5 need to cut Cardboard?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cardboard on the Longer Ray5?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What software do I use with the Longer Ray5 for Cardboard?
The Longer Ray5 works with LightBurn,LaserGRBL. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Cardboard
Templates ready to cut on your Longer Ray5 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris