Monport 40W CO2 — Stainless Steel
1 community-tested setting for engrave Stainless Steel on the Monport 40W CO2. Always run a test on scrap material first.
These 1 setting cover engrave Stainless Steel on the Monport 40W CO2 (40W CO₂ laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to engrave Stainless Steel on the Monport 40W CO2?
The top-rated community setting uses 220 mm/s at 58% power. Apply Cermark spray, let dry, laser, wipe off.
Can the Monport 40W CO2 cut Stainless Steel?
A 40W CO₂ laser can mark or engrave metal surfaces but cannot cut through them — metal cutting requires a much higher-powered laser or a plasma cutter.
How many passes does the Monport 40W CO2 need to engrave Stainless Steel?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Stainless Steel on the Monport 40W CO2?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Stainless Steel on the Monport 40W CO2?
Settings here use 300 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Stainless Steel
Templates ready to cut on your Monport 40W CO2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris