Monport 80W CO2
co2 laser80W
Top 10 community settings — bonnycreations.com
| Material | Op | Speed · Power · Passes |
|---|---|---|
| Cardstock | engrave | 500 mm/s · 5–8% |
| 3mm Walnut Plywood | engrave | 500 mm/s · 5–10% |
| Bamboo Cutting Board | cut | 19 mm/s · 75–80% · air |
| 12mm Plywood | engrave | 250 mm/s · 15–20% |
| Rubber Stamp Material | cut | 11 mm/s · 75–80% · air |
| 3mm Clear Acrylic | engrave | 400 mm/s · 10–15% |
| 6mm MDF | engrave | 350 mm/s · 10–15% |
| 3mm Baltic Birch Plywood | engrave | 500 mm/s · 10–15% |
| Genuine Leather | cut | 17 mm/s · 50–55% · air |
| 3mm MDF | engrave | 500 mm/s · 10–15% |
Community-contributed settings. Results vary by material batch and machine calibration — always test on scrap first.
Full settings library at bonnycreations.com/settings/machines/monport-80w-co2
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris