Monport GP 40W CO2 — Anodized Aluminum
1 community-tested setting for engrave Anodized Aluminum on the Monport GP 40W CO2. Always run a test on scrap material first.
These 1 setting cover engrave Anodized Aluminum on the Monport GP 40W CO2 (40W CO₂ laser). Metal marking typically requires Cermark spray or an anodized coating — bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to engrave Anodized Aluminum on the Monport GP 40W CO2?
The top-rated community setting uses 800 mm/s at 25% power, 30 passes. 0
Can the Monport GP 40W CO2 cut Anodized Aluminum?
A 40W CO₂ laser can mark or engrave metal surfaces but cannot cut through them — metal cutting requires a much higher-powered laser or a plasma cutter.
How many passes does the Monport GP 40W CO2 need to engrave Anodized Aluminum?
Settings here range from 30 to 30 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Anodized Aluminum on the Monport GP 40W CO2?
Yes — 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Monport GP 40W CO2 for Anodized Aluminum?
The Monport GP 40W CO2 works with LightBurn. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Anodized Aluminum
Templates ready to cut on your Monport GP 40W CO2 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris