NEJE Master 2S — Maple
2 community-tested settings for cut, engrave Maple on the NEJE Master 2S. Always run a test on scrap material first.
Where to buy
Buy the NEJE Master 2S — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Maple on the NEJE Master 2S (20W diode laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut — pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to cut Maple on the NEJE Master 2S?
The top-rated community setting uses 1800 mm/min at 100% power, 4 passes. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the NEJE Master 2S need to cut Maple?
Settings here range from 1 to 4 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Maple on the NEJE Master 2S?
Yes — 2 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Maple
Templates ready to cut on your NEJE Master 2S once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris