OMTech MP6969-60 60W MOPA Fiber: Copper
1 community-tested setting for mark Copper on the OMTech MP6969-60 60W MOPA Fiber. Always run a test on scrap material first.
Where to buy
OMTech MP6969-60 60W MOPA Fiber: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover mark Copper on the OMTech MP6969-60 60W MOPA Fiber (60W fiber laser). Metal marking typically requires Cermark spray or an anodized coating: bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to mark Copper on the OMTech MP6969-60 60W MOPA Fiber?
The top-rated community setting uses 293 mm/s at 78% power, 3 passes. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the OMTech MP6969-60 60W MOPA Fiber need to engrave Copper?
Settings here range from 3 to 3 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Copper on the OMTech MP6969-60 60W MOPA Fiber?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Copper
Templates ready to cut on your OMTech MP6969-60 60W MOPA Fiber once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris