OMTech MP6969-60 60W MOPA Fiber: Powder Coated Steel
1 community-tested setting for engrave Powder Coated Steel on the OMTech MP6969-60 60W MOPA Fiber. Always run a test on scrap material first.
Where to buy
OMTech MP6969-60 60W MOPA Fiber: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Powder Coated Steel on the OMTech MP6969-60 60W MOPA Fiber (60W fiber laser). Metal marking typically requires Cermark spray or an anodized coating: bare metal cutting needs a much higher-powered machine.
1 setting
Frequently asked questions
What speed should I use to engrave Powder Coated Steel on the OMTech MP6969-60 60W MOPA Fiber?
The top-rated community setting uses 1308 mm/s at 62% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
Can the OMTech MP6969-60 60W MOPA Fiber cut Powder Coated Steel?
A 60W fiber laser can mark or engrave metal surfaces but cannot cut through them: metal cutting requires a much higher-powered laser or a plasma cutter.
How many passes does the OMTech MP6969-60 60W MOPA Fiber need to engrave Powder Coated Steel?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Powder Coated Steel on the OMTech MP6969-60 60W MOPA Fiber?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Powder Coated Steel
Templates ready to cut on your OMTech MP6969-60 60W MOPA Fiber once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris