OMTech Polar
co2 laser30W
Top 10 community settings — bonnycreations.com
| Material | Op | Speed · Power · Passes |
|---|---|---|
| Cardstock | cut | 80 mm/s · 15% |
| Paper | cut | 100 mm/s · 12% |
| Photopolymer Stamp Blank | engrave | 100 mm/s · 48% |
| 9mm Birch Plywood | engrave | 100 mm/s · 25% |
| 9mm Birch Plywood | cut | 2.5 mm/s · 85% · 4× · air |
| 5mm Plywood | engrave | 120 mm/s · 24% |
| 5mm Plywood | cut | 7 mm/s · 72% · 2× · air |
| 2mm Basswood Plywood | engrave | 350 mm/s · 12% |
| 2mm Basswood Plywood | cut | 22 mm/s · 38% · air |
| 6mm Clear Acrylic | engrave | 80 mm/s · 28% |
Community-contributed settings. Results vary by material batch and machine calibration — always test on scrap first.
Full settings library at bonnycreations.com/settings/machines/omtech-polar
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris