Ortur Aufero Laser 2: Cork
2 community-tested settings for cut, engrave Cork on the Ortur Aufero Laser 2. Always run a test on scrap material first.
Where to buy
Ortur Aufero Laser 2: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Cork on the Ortur Aufero Laser 2 (10W diode laser). Always test on scrap before committing to your final piece: material batches can vary in density and composition.
2 settings
Frequently asked questions
What speed should I use to cut Cork on the Ortur Aufero Laser 2?
The top-rated community setting uses 2450 mm/min at 70% power. Estimated: wattage-scaled from this brand's own real settings at a different power tier. Unverified -- treat as a starting point.
How many passes does the Ortur Aufero Laser 2 need to cut Cork?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cork on the Ortur Aufero Laser 2?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Cork
Templates ready to cut on your Ortur Aufero Laser 2 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris