Ortur Laser Master 2 Pro
diode laser20W400×400mm
Top 10 community settings — bonnycreations.com
| Material | Op | Speed · Power · Passes |
|---|---|---|
| Rubber Stamp Material | engrave | 2000 mm/min · 55% |
| 3mm Walnut Plywood | engrave | 3000 mm/min · 35% |
| 3mm Walnut Plywood | cut | 1500 mm/min · 88% |
| Bamboo 3mm | engrave | 3500 mm/min · 38% |
| Bamboo 3mm | cut | 1500 mm/min · 85% |
| Cotton Fabric | engrave | 5500 mm/min · 25% |
| Cotton Fabric | cut | 3500 mm/min · 75% |
| Denim Fabric | engrave | 4000 mm/min · 35% |
| Denim Fabric | cut | 3500 mm/min · 80% |
| Chipboard 2mm | engrave | 5000 mm/min · 45% |
Community-contributed settings. Results vary by material batch and machine calibration — always test on scrap first.
Full settings library at bonnycreations.com/settings/machines/ortur-laser-master-2-pro
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris