Sculpfun SF-A9 — Chipboard 2mm
2 community-tested settings for engrave, cut Chipboard 2mm on the Sculpfun SF-A9. Always run a test on scrap material first.
These 2 settings cover engrave and cut Chipboard 2mm on the Sculpfun SF-A9 (40W diode laser). Keep speeds high and power low to avoid burning through; masking tape on the surface reduces scorching around cut edges.
2 settings
Frequently asked questions
What speed should I use to engrave Chipboard 2mm on the Sculpfun SF-A9?
The top-rated community setting uses 8500 mm/min at 32% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Sculpfun SF-A9 need to cut Chipboard 2mm?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Chipboard 2mm on the Sculpfun SF-A9?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Chipboard 2mm on the Sculpfun SF-A9?
Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
Now make something with Chipboard 2mm
Templates ready to cut on your Sculpfun SF-A9 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris