Thunder Laser Nova 35 — 6mm Baltic Birch Plywood
1 community-tested setting for cut 6mm Baltic Birch Plywood on the Thunder Laser Nova 35. Always run a test on scrap material first.
These 1 setting cover cut 6mm Baltic Birch Plywood on the Thunder Laser Nova 35 (100W CO₂ laser). Wood results vary by grain direction and moisture content — always run a quick test on scrap before cutting your final piece.
1 setting
Frequently asked questions
What speed should I use to cut 6mm Baltic Birch Plywood on the Thunder Laser Nova 35?
The top-rated community setting uses 30 mm/s at 62% power. Always run a test burn on scrap material first to confirm focus and power are correct for your specific batch.
How many passes does the Thunder Laser Nova 35 need to cut 6mm Baltic Birch Plywood?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for 6mm Baltic Birch Plywood on the Thunder Laser Nova 35?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with 6mm Baltic Birch Plywood
Templates ready to cut on your Thunder Laser Nova 35 once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris