Trotec Speedy 400: Slate
1 community-tested setting for engrave Slate on the Trotec Speedy 400. Always run a test on scrap material first.
Where to buy
Trotec Speedy 400: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 1 setting cover engrave Slate on the Trotec Speedy 400 (80W CO₂ laser). Stone engraving is forgiving: the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
1 setting
Frequently asked questions
What speed should I use to engrave Slate on the Trotec Speedy 400?
The top-rated community setting uses 400 mm/s at 30% power. Same 100W CO2 tube class as the Boss LS-1630.
Can the Trotec Speedy 400 cut Slate?
Cutting Slate on the Trotec Speedy 400 may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the Trotec Speedy 400 need to engrave Slate?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Slate on the Trotec Speedy 400?
Yes: 1 of the 1 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What software do I use with the Trotec Speedy 400 for Slate?
The Trotec Speedy 400 works with Trotec Ruby. Enter the speed, power, and passes directly into your software's layer settings: no conversion needed.
Now make something with Slate
Templates ready to cut on your Trotec Speedy 400 once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris