WeCreat Vision: Cotton Fabric
2 community-tested settings for cut, engrave Cotton Fabric on the WeCreat Vision. Always run a test on scrap material first.
Where to buy
WeCreat Vision: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Cotton Fabric on the WeCreat Vision (20W diode laser). Always test on scrap before committing to your final piece: material batches can vary in density and composition.
2 settings
Frequently asked questions
What speed should I use to cut Cotton Fabric on the WeCreat Vision?
The top-rated community setting uses 3500 mm/min at 75% power. Estimated: copied from a different brand's real settings at the same power/laser-type class -- no same-brand data exists yet for this machine. Unverified, more speculative than same-brand estimates -- treat as a rough starting point only.
How many passes does the WeCreat Vision need to cut Cotton Fabric?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cotton Fabric on the WeCreat Vision?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
Now make something with Cotton Fabric
Templates ready to cut on your WeCreat Vision once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris