WeCreat Vision: Plywood
2 community-tested settings for cut, engrave Plywood on the WeCreat Vision. Always run a test on scrap material first.
Where to buy
WeCreat Vision: check current price & availability
Affiliate link: we may earn a small commission at no extra cost to you.
These 2 settings cover cut and engrave Plywood on the WeCreat Vision (20W diode laser). Wood results vary by grain direction and moisture content: always run a quick test on scrap before cutting your final piece. Some settings use multiple passes for a cleaner cut: pin or tape your material flat before running to prevent shift between passes.
2 settings
Frequently asked questions
What speed should I use to cut Plywood on the WeCreat Vision?
The top-rated community setting uses 2500 mm/min at 85% power, 2 passes. Estimated: copied from a different brand's real settings at the same power/laser-type class -- no same-brand data exists yet for this machine. Unverified, more speculative than same-brand estimates -- treat as a rough starting point only.
How many passes does the WeCreat Vision need to cut Plywood?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift: always pin or tape your material flat before running.
Do I need air assist for Plywood on the WeCreat Vision?
Yes: 1 of the 2 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
Now make something with Plywood
Templates ready to cut on your WeCreat Vision once you've dialed in the settings.
"Used it with a Glowforge: engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
: Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once: making that job so much easier."
: Camp
"Excellent quality and design. Cut clean and neat!"
: LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
: Bruce
"Excellent quality. Item as described. Expectations exceeded."
: Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
: chris