xTool D1 Pro — Ceramic Tile
3 community-tested settings for engrave Ceramic Tile on the xTool D1 Pro. Always run a test on scrap material first.
Where to buy
Buy the xTool D1 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 3 settings cover engrave Ceramic Tile on the xTool D1 Pro (20W diode laser). Stone engraving is forgiving — the laser ablates the surface without deep penetration, so focus accuracy and DPI matter more than power.
3 settings
Frequently asked questions
What speed should I use to engrave Ceramic Tile on the xTool D1 Pro?
The top-rated community setting uses 500 mm/min at 100% power. Slower fine-detail ceramic tile pass. Suitable for photo engraving on tile with Cermark coating applied.
Can the xTool D1 Pro cut Ceramic Tile?
Cutting Ceramic Tile on the xTool D1 Pro may be possible but no verified cut settings have been submitted yet. You can contribute your own tested settings using the button above.
How many passes does the xTool D1 Pro need to engrave Ceramic Tile?
Settings here range from 1 to 2 passes. Multiple passes give a cleaner edge but increase the risk of material shift — always pin or tape your material flat before running.
Do I need air assist for Ceramic Tile on the xTool D1 Pro?
Air assist is not flagged as required for these settings, but it is good practice during cutting operations to keep the lens clean and reduce char buildup.
What DPI should I use to engrave Ceramic Tile on the xTool D1 Pro?
Settings here use 300–400 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the xTool D1 Pro for Ceramic Tile?
The xTool D1 Pro works with xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Ceramic Tile
Templates ready to cut on your xTool D1 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris