xTool D1 Pro — Cotton Fabric
4 community-tested settings for engrave, cut Cotton Fabric on the xTool D1 Pro. Always run a test on scrap material first.
Where to buy
Buy the xTool D1 Pro — check current price & availability
Affiliate link — we may earn a small commission at no extra cost to you.
These 4 settings cover engrave and cut Cotton Fabric on the xTool D1 Pro (20W diode laser). Always test on scrap before committing to your final piece — material batches can vary in density and composition.
4 settings
Frequently asked questions
What speed should I use to engrave Cotton Fabric on the xTool D1 Pro?
The top-rated community setting uses 7000 mm/min at 35% power. Engrave discolours fabric; use for marking only.
How many passes does the xTool D1 Pro need to cut Cotton Fabric?
All settings here use a single pass. Confirm focus and do a small test burn before committing to your final design.
Do I need air assist for Cotton Fabric on the xTool D1 Pro?
Yes — 1 of the 4 settings here specify air assist on. It clears smoke and debris from the cut line, improves edge quality, and reduces fire risk especially during cutting.
What DPI should I use to engrave Cotton Fabric on the xTool D1 Pro?
Settings here use 254 DPI. For photographic detail or fine artwork, consider testing at higher DPI, but expect longer run times.
What software do I use with the xTool D1 Pro for Cotton Fabric?
The xTool D1 Pro works with xTool Creative Space. Enter the speed, power, and passes directly into your software's layer settings — no conversion needed.
Now make something with Cotton Fabric
Templates ready to cut on your xTool D1 Pro once you've dialed in the settings.
"Used it with a Glowforge — engraved beautifully with no changes. I will be purchasing more digital downloads from this shop."
— Anna
"I was struggling with lining up my NFC business cards. I was able to not only line them up much better but also do multiple cards at once — making that job so much easier."
— Camp
"Excellent quality and design. Cut clean and neat!"
— LYNN
"Great jigs. Appreciate the time saved not having to build this from scratch!"
— Bruce
"Excellent quality. Item as described. Expectations exceeded."
— Michael
"This template made my slate coasters so much easier. 4×4 coasters from Michaels drop in easily and are easy to remove. Def worth it."
— chris